Autopsy & Embalming Stations
1036-7 Wall Mount Autopsy Station, Left Sink
Call us at 800-410-0100 for a Quote
-
- Large single-compartment sink with rapid and positive draining.
- Cart-to-sink locking mechanism with slide latch which can be accessed from either side of the carrier.
- Full length specimen shelf (12 in./30 cm. wide x "length of unit").
- All stainless steel construction with heliarc welded seams and joints, ground and polished to a smooth finish.
- Large radii on all inside corners for easy cleaning and required sanitation.
- Plumbing and electrical lines are factory installed and require only minimum installation.
-
- Large instrument drawer.
- Light fixture over the work area.
- Heavy-duty commercial waste disposal, 1/2 hp an switch.
- GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing a reverse pressure of water.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Hot and cold water fixture with convenient goose-neck faucet and wrist blade handles.
- Dissecting area rinse assembly with cold water valve.
- Complete back-siphon protection provided by reduced pressure principle assembly.
-
- Plumbing fixtures can be located in varying positions depending on your desired work environment.
- Custom layouts and designs are available.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
- See image for available options, typical dimensions, and additional accessories.
1036-8 Wall Mount Autopsy Station, Right Sink
Call us at 800-410-0100 for a Quote
-
- Large single-compartment sink with rapid and positive drainage.
- Cart-to-sink locking mechanism with slide latch which can be accessed from either side of the carrier.
- Full length specimen shelf (12 in./30 cm. wide x "length of unit").
- All stainless steel construction with heliarc welded seams and joints, ground and polished to a smooth finish.
- Large radii on all inside corners for easy cleaning and required sanitation.
- Plumbing and electrical lines are factory installed and require only minimum installation.
-
- Large instrument drawer.
- Light fixture over the work area.
- Heavy-duty commercial waste disposal, 1/2hp an switch.
- GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing a reverse pressure of water.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Hot and cold water fixture with convenient goose-neck faucet and wrist blade handles.
- Dissecting area rinse assembly with cold water valve.
- Complete backsiphon protection provided by reduced pressure principle assembly.
-
- Plumbing fixtures can be located in varying positions depending on your desired work environment.
- Custom layouts and designs are available.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
- See image for available options, typical dimensions, and additional accessories.
1036-10 - Wall Mount Autopsy Station, Center Sink
Call us at 800-410-0100 for a Quote
-
- Large single-compartment sink with rapid and positive drainage.
- Cart-to-sink locking mechanism with slide latch which can be accessed from either side of the carrier.
- Full length specimen shelf (12 in./30 cm. wide x "length of unit").
- All stainless steel construction with heliarc welded seams and joints, ground and polished to a smooth finish.
- Large radii on all inside corners for easy cleaning and required sanitation.
- Plumbing and electrical lines are factory installed and require only minimum installation.
-
- Large instrument drawers.
- Light fixture over the work area.
- Heavy-duty commercial waste disposal, 1/2 hp an switch.
- (2) GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing a reverse pressure of water.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Hot and cold water fixture with convenient goose-neck faucet and wrist blade handles.
- Dissecting area rinse assembly with cold water valve.
- Complete backsiphon protection provided by reduced pressure principle assembly.
-
- Plumbing fixtures can be located in varying positions depending on your desired work environment.
- Custom layouts and designs are available.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
- See image for available options, typical dimensions, and additional accessories.
Center Dissecting, Two Areas for Cart
Call us at 800-410-0100 for a Quote
-
- (2) Large single-compartment sink with rapid and positive drainage.
- (2) Cart-to-sink locking mechanism with slide latch which can be accessed from either side of the carrier.
- Full length specimen shelf (12 in./30 cm. wide x "length of unit").
- All stainless steel construction with heliarc welded seams and joints, ground and polished to a smooth finish.
- Large radii on all inside corners for easy cleaning and required sanitation.
- Plumbing and electrical lines are factory installed and require only minimum installation.
-
- Large instrument drawer.
- Light fixture over the work area.
- (2) Heavy-duty commercial waste disposal, 1/2 hp an switch.
- GFCI duplex receptacle with waterproof cover.
- (2) Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing a reverse pressure of water.
- (2) Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- (2) Hot and cold water fixture with convenient goose-neck faucet and wrist blade handles.
- Dissecting area rinse assembly with cold water valve.
- Complete backsiphon protection provided by reduced pressure principle assembly.
-
- Plumbing fixtures can be located in varying positions depending on your desired work environment.
- Custom layouts and designs are available.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
- See image for available options, typical dimensions, and additional accessories.
Ventilated Embalming Station
Call us at 800-410-0100 for a Quote
-
- Vent system for connection to embalming tables.
- Exhaust duct at top of station for exterior connection to building ventilation system.
- Quick connect plumbing and electrical for connection to embalming tables.
- Large single-compartment sink with rapid and positive drainage.
- Cart-to-sink locking mechanism with slide latch which can be accessed from either side of the carrier.
- Full length specimen shelf (12in/30cm wide x "length of unit").
- All stainless steel construction with heliarc welded seams and joints, ground and polished to a smooth finish.
- Large radii on all inside corners for easy cleaning and required sanitation.
- Plumbing and electrical lines are factory installed and require only minimum installation.
-
- Large instrument drawer(s).
- Light fixture(s) over the work area.
- Heavy-duty commercial waste disposal, 1/2hp an switch.
- GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing a reverse pressure of water.
- Spray hose assembly with cold water control valve, nozzle, 10ft/3m of flexible hose.
- Hot and cold water fixture with convenient goose-neck faucet and wrist blade handles.
- Dissecting area rinse assembly with cold water valve.
- Complete backsiphon protection provided by reduced pressure principle assembly.
-
- Plumbing fixtures can be located in varying positions depending on your desired work environment.
- Custom layouts and designs are available.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
- See images for available options, typical dimensions, and additional accessories.
600035 - Ventilated Embalming Table
Call us at 800-410-0100 for a Quote
-
- Table is designed as an integral part of the embalming process and for cadaver handling.
- Equipped with rollers that allow for easy loading and unloading of cadavers.
- 3in/5cm permanent slope designed to assist in drainage.
- Fabricated from square, 304 stainless steel tubing 1.5 in./3 cm., .12 in. thickness.
- Stainless steel has a grained finish and all welds match adjoining surfaces.
- Easy quick connections for electrical and water rinse assembly.
-
- Accepts the standard stainless steel body trays (T3626).
- Tray rinse for easy cleaning, sanitation and rapid disposal of waste materials.
- Flip latch to hold tray in position while in transport.
- GFCI duplex receptacle with waterproof cover.
- (4) 8 in./20 cm. casters, all with brake mechanisms.
- (2) Flip tray rinse assemblies.
- (2) Side perforated exhaust downdraft ventilation connections (connect to the 1036-25 Ventilated Embalming Station).
-
- Standard design for 23 in./58 cm. body tray. Please inquire for special order sizes.
1036-9 Stainless Steel Embalming Station
Call us at 800-410-0100 for a Quote
-
- All stainless steel construction.
- Large sink basin.
- Hot and cold water mixing faucet mounted on top deck with high spout for use with your embalming machine.
- Internally plumbed and wired requiring only a single point connection for water and power.
-
- GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing reverse pressure of water.
- Cold water spray hose assembly with spray nozzle.
- Access panel.
-
- Wall mount (standard) or floor mount available.
- Splash guard cover for sink basin.
- .75 hp waste disposal unit.
- Exhaust vent to connect to building ventilation system.
- Eyewash assembly.
- Perimeter sink rinse assembly.
- Hot and cold water mixing faucet.
- Hot and cold water spray hose assembly with spray nozzle.
- See images for available options, typical dimensions, and additional accessories.
1036-13 - Flush Embalming Station
Call us at 800-410-0100 for a Quote
-
- All stainless steel construction on rear base housing.
- Large white vitreous china flush sink.
- Hot and cold water mixing faucet mounted on top deck with high spout for use with your embalming machine.
- Internally plumbed and wired requiring on singly point connection of water and power.
-
- GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing reverse pressure of water.
- Hot and cold water spray hose assembly with spray nozzle and 10ft/3m of flexible hose.
- Splash cover with port for placement of embalming table drain hose.
- Push button control to flush sink basin.
-
- See images for available options, typical dimensions, and additional accessories.
1036-2 Wall Mount Service Station
Call us at 800-410-0100 for a Quote
-
- Fabricated of stainless steel.
- Open stainless steel shelving for pluming access.
- All plumbing and electrical hook-ups designed for easy installation.
- .75 hp waste disposal unit.
- Completely equipped with all the best quality chrome and stainless steel fixtures.
-
- Spray hose assembly with cold water control valve, nozzle and 10 ft./3 m. of flexible hose.
- Hot and cold water tempering unit with lever handle.
- Central lever self closing pre-rinse valve with 10 ft./3 m. flexible vinyl hose.
- GFCI duplex receptacle.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing reverse pressure of water.
-
- 1036-2SE includes emergency shower and eyewash assemblies.
- See images for available options, typical dimensions, and additional accessories.
1036-1R - Water Control Unit
$2,350.00
-
-
Tall Filler Spout for Embalming Machine
The tall faucet is designed for your embalming machine to fit under the spout. By using the master mixing valve, you can supply the desired temperature to the tank of your machine. The spout is easily turned out of the way when not in use. -
Master Mixing Valves
Water temperature to the table rinse and tall faucet are easily controlled with the master mixing valves. Simply adjust lever until the desired temperature is achieved.
-
Easy Installation
The entire unit is pre-assembled and pre plumbed for easy installation. Simply drop into the cutout in your countertop and connect the utility lines. THe base plate is fabricated of heavy gauge stainless steel. Will install in counters as shallow as 18in/45cm deep.
-
Tall Filler Spout for Embalming Machine
-
-
Table Rinse
A serrated attachment is provided for quick connection of rinse hose. A constant flow of water can be supplied to the embalming table for cleaning or procedure purpose. The rinse is vacuum breaker protected for backflow prevention. Rinse hose included. -
Hydro-Aspirator Assembly
A hydro-aspirator with built-in vacuum breaker prevents contamination of your water supply. The clear sight drain also prevents contamination since the air gap will not allow aspirated material back into the aspirator assembly. A valve is provided to control water supply to the aspirator assembly. Included 10ft/3m aspirator hose & 5in/12cm draw hose. -
LW480 Aspirator
Deluxe hydro-aspirator with built-in vacuum breaker and control lever to be used to reverse the flow of water so as to direct it through the hose connections for either drawing fluid from the body cavity or rinsing a desired location. Fits most standard faucet threads. Fabricated from chrome plated brass. -
LW481 Extension - Buy me separately!
The hydro-aspirator extension is fabricated from chrome plated brass. It provides further safety against polluted backflow. -
LW482 Non-clogging Head - Buy me separately!
The non-clogging aspirator head prevents large debris from entering and clogging the system. -
Aspirator Tubing
~Aspirator/Trocar tubing, ID: .375", OD 625". -
Splash Tubing
~Splash tubing for aspirator drain, Embalming and Autopsy tops. ID: 1", OD 1.25".
-
Table Rinse
-
- Pegboard Backsplash option available!
- Please specify Left or Right configuration when ordering. Designates which side the tall filler spout resides on.
- See images for available options and additional accessories.
- For individual units, see our embalming machines and aspirators section.
1036-3 CO Embalming Table Collection System
Call us at 800-410-0100 for a Quote
-
- Quick and easy set up made to mount on your embalming area base cabinets. Continuous rinse moves debris of harmful contaminants and air-borne pathogens down the drain.
- 10.5" Height x 10 Width dimensions at wall mount, height tapers down to 7.5"
- 12" protrusion from mount
-
- All stainless steel construction
- 3" Removable drain for evidence rinse or large waste not meant to be drained.
- Single point cold water pluming connection.
- Cold water flow control valve.
- Bottom removable access panel.
-
- See images for available options, typical dimensions, and additional accessories.
1036-3 Embalming Collection System
Call us at 800-410-0100 for a Quote
-
- All stainless steel construction.
- Collection drain with cold water rinse
- Hot and cold water mixing faucet mounted on top deck with high spout for use with your embalming machine.
- Internally plumbed and wired requiring only a single point connection for water and power.
-
- Cold water spray hose assembly with spray nozzle.
- Access panel.
-
- Wall mount (standard) or floor mount available.
- Hot and cold water mixing faucet.
- Spray hose assembly with spray nozzle.
- See images for available options, typical dimensions, and additional accessories.
Click here to view or download this item in our online catalog!
Adjustable Height Floor Mount Autopsy Station, Center Sink
Call us at 800-410-0100 for a Quote
-
- Featuring electromechanical height adjustment
- Large single-compartment sink with rapid and positive drainage.
- Cart-to-sink locking mechanism with slide latch which can be accessed from either side of the carrier.
- Full length specimen shelf (12 in./30 cm. wide x "length of unit").
- All stainless steel construction with heliarc welded seams and joints, ground and polished to a smooth finish.
- Large radii on all inside corners for easy cleaning and required sanitation.
- Plumbing and electrical lines are factory installed and require only minimum installation.
-
- Large instrument drawers.
- Light fixture over the work area.
- Heavy-duty commercial waste disposal, 1/2 hp an switch.
- (2) GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing a reverse pressure of water.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Hot and cold water fixture with convenient goose-neck faucet and wrist blade handles.
- Dissecting area rinse assembly with cold water valve.
- Complete backsiphon protection provided by reduced pressure principle assembly.
-
- Plumbing fixtures can be located in varying positions depending on your desired work environment.
- Custom layouts and designs are available.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
- See image for available options, typical dimensions, and additional accessories.