Necropsy Stations
Downdraft Necropsy Workstation
Call us at 800-410-0100 for a Quote
-
- Ventilated workstation for animal necropsies. Pulls air/odors down and away from personnel.
- Type 304 stainless steel construction.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Internal baffle to distribute downdraft exhaust across entire length of the table.
- Full length, perforated supports.
- Rapid and positive drainage.
-
- Access panel door.
- GFCI duplex receptacle with waterproof cover.
- Plumbing and electrical lines factory installed and required only single point connection at the project location.
- Spray hose assembly with cold water control valve, nozzle and 10 ft./3 m. of flexible hose.
- Provided with or without sink.
- Manual Damper.
-
- See image for available options, recommended dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
1036-215 Small Animal Necropsy Table
Call us at 800-410-0100 for a Quote
-
- Animal necropsy workstation
- Type 304 stainless steel construction. Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
-
- Access panel door.
- GFCI duplex receptacle with waterproof cover.
- Spray hose assembly with cold water control valve, nozzle and 10 ft./3 m. of flexible hose.
- Manual Damper.
- Radii on all corners for easy cleaning.
- Rapid and positive drainage.
- Full length, perforated supports.
-
- Total Downdraft Ventilation option available.
- Double-Cone Downdraft Ventilation option available.
- See image for available options, recommended dimensions, and additional accessories.
- Options based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
Small Animal Downdraft Dissection Table
Call us at 800-410-0100 for a Quote
-
- Type 304 stainless steel construction. Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
-
- Hydro-aspirator with cold water control valve, nozzle, 10 ft./3 m. of flexible hose and vacuum breaker.
- Mixing faucet with gooseneck and wrist blade handles.
- Heavy-duty 1/2 hp commercial disposal with switch.
- Spray hose assembly
- (2) Perforated dissection grids.
- Rapid and positive drainage
- Removable access panel
- GFCI duplex receptacle with waterproof cover.
- Removable access panel.
- Plumbing and electrical lines factory installed and required only single point connection at the project location.
- Downdraft exhaust provided across entire work area.
-
- See image for available options, recommended dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
- Eyewash assembly (as shown).
Medium Size Necropsy Station
Call us at 800-410-0100 for a Quote
-
- Type 304 stainless steel construction.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Downdraft ventilation provided at each sink location.
-
- (2) Spray hose assemblies with cold water control valves, nozzles, 10 ft./3 m. of flexible hose and back flow prevention.
- Removable perforated sink covers.
- Mixing faucet with gooseneck spout and wrist blade handles.
- (2) Heavy-duty 1/2 hp commercial disposals with switches.
- Rapid and positive drainage.
- Removable access panel.
- (2) GFCI duplex receptacles with waterproof covers.
- Plumbing and electrical lines factory installed and required only single point connection at the project location.
-
- See image for available options, recommended dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
Backdraft Dissection Station
Call us at 800-410-0100 for a Quote
-
- Our backdraft dissection stations are designed to provide an economical vented work area for controlling odors, gases and chemical fumes. We offer a variety of optional features including sinks, storage drawers and cabinets, lab gas fixtures, lighting and enable you to customize stations.
- Fabricated from heavy gauge 304 stainless steel with a No. 4 finish with a marine edge.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
-
- Manual adjustable damper.
- Stainless steel base frame with adjustable leveling feet.
- Backdraft ventilation provided.
- Removable grill held in place with thumb screws.
- Duct connection size and quantity based upon length of table.
-
- See image for available options, recommended dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
Standard Necropsy Station
Call us at 800-410-0100 for a Quote
-
- Type 304 stainless steel construction.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Stainless steel base frame with adjustable leveling feet.
-
- Mixing faucet with gooseneck spout and wrist blade handles.
- Full length perforated grid supports.
- Rapid and positive drainage.
- GFCI duplex receptacle with waterproof cover.
- Plumbing and electrical lines factory installed and required only single point connection at the project location.
-
- See image for available options, recommended dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
- Spray hose assembly & disposal (as shown).
Ventilated Hood Dissection Table
Call us at 800-410-0100 for a Quote
-
- Fabricated from heavy gauge 304 stainless steel with a No. 4 finish.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Stainless steel base frame with adjustable feet.
-
- Faucet with cold water control.
- Hose rinse assembly with cold water control.
- Rapid and positive drainage.
- Hinged plexiglass workshield.
- LED light fixture.
- GFCI duplex receptacle with waterproof cover.
- Plumbing and electrical lines factory installed and required only single point connection at the project location.
-
- See image for available options, recommended dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
- Units are sized per customer requirements.
1036-250 Large Hydraulic Necropsy Table
Call us at 800-410-0100 for a Quote
-
- U-shaped table is designed for use as a large animal necropsy table. It features all heavy gauge stainless steel construction. The tabletop and inner frame support are attached to an electrically powered hydraulic scissor lift. Inner frame support is fabricated from heavy gauge stainless steel tubing.
-
- Designed to handle a centralized load up to 5000 lbs/ 2267 kg and an offset load up to 2500 lbs/ 1113 kg.
- floor mounted, hydraulic scissor lift with load capacity of 6,000 lbs/ 2721 kg. (~230v/50-60Hz/1 - 1.5hp motor).
- Accordion style bellows surround the scissor lift allowing for complete wash down of the unit.
- Drainage via opening located on the back edge of the table.
- Easy to use up/down elevation control.
-
- Lighter capacity mobile units also available.
- Inground lifting devices available. Please contact us for details and special installation requirements.
- See image for available options, recommended dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
Mobile Necropsy Table Tilt and Lift
Call us at 800-410-0100 for a Quote
-
- All heavy gauge stainless steel construction.
- Table top and inner frame support are attached to an electrically powered hydraulic scissor lift.
- (4) lock pivot casters allow the table to tilt as desired.
-
- Designed to handle a centralized load up to 3000 lbs./ 1361 kg.
- Inner frame support is fabricated from heavy gauge steel tubing.
- Drain opening is located on the back edge of the table.
- Easy to use up/down elevation control.
- Retractable electrical cord reel.
- Hydraulic cylinders outfitted to the scissor lift allow the table top to lift to a height up to 56.25in.
-
- Type 316 stainless steel (top only).
- Custom layout and designs available, please inquire.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
1036-250M Mobile Hydraulic Necropsy Table
Call us at 800-410-0100 for a Quote
-
- U-shaped, mobile table is designed for use as a large animal necropsy table. It features all heavy gauge stainless steel construction. The tabletop and inner frame support are attached to an electrically powered hydraulic scissor lift. Inner frame support is fabricated from heavy gauge stainless steel tubing.
-
- Designed to handle a centralized load up to 5000 lbs/ 2267 kg and an offset load up to 2500 lbs/ 1113 kg.
- Accordion style bellows surround the scissor lift allowing for complete wash down of the unit.
- Drainage via slot opening located on the back edge of the table, or small sink with strainer.
- Easy to use up/down elevation control.
- (2) swivel and (2) non-swivel casters.
- Floor brake to secure in place.
-
- Tabletop can be sized to your specific project requirements
- See image for available options, typical dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
1036-250SP Self-Propelled Hydraulic Necropsy Table
Call us at 800-410-0100 for a Quote
-
- Table is designed for use as a large animal necropsy table.
- All heavy gauge stainless steel construction.
- Inner frame support is fabricated from heavy gauge stainless steel tubing.
- The tabletop and inner frame support are attached to an electrically powered hydraulic scissor lift.
- Accordion style bellows surround the scissor lift allowing for complete wash down of the unit.
-
- Designed to handle a centralized load up to 5000 lbs/ 2267 kg and an offset load up to 2500 lbs/ 1113 kg.
- Easy to use up/down elevation control. Variable speed control - forward/reverse. 180° turning radius.
- Built in 24V charger and D/C battery.Butterfly switches for forward & reverse.
- Push buttons for raising and lowering of forks.
- Built in horn.
- Electro-mechanical brake system.
- Drainage slot along side or end, with optional small sink with strainer.
- (2) Rear spring loaded stabilizing casters and (2) ridged casters located in front.
-
- See image for available options, typical dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
Multi-user Backdraft/Downdraft Station
Call us at 800-410-0100 for a Quote
-
- Type 304 stainless steel construction.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Backdraft/downdraft exhaust provided to each work area.
- Wall mount, island mount, singular and multi user.
- Configure number of stations per your requirements.
- Handicap accessible.
-
- (2) or (4) Hinged access doors.
- (2) or (4) 18 ga/68 L stainless steel perforated work surface panels. Recessed to prevent fluids escaping.
- (2) or (4) GFCI duplex receptacles with waterproof covers.
-
- Units are sized per customer requirements.
- CO2 valves/vacuum valves/compressed air valves.
- Type 316 stainless steel.
- Spray hose with braided hose.
- Surgical light fixure.
- Reticulating arm fluorescent light with magnifier.
- Reticulating arm examination light with magnifier.
- Flex arm incandescent light with magnifier.
- Removable measuring rule.
- Magnetic instrument holder.
- Safety Splash Shield.
- Digital platform scale, 4 lbs./2 kg. capacity, economy or premium grades available.
- Polyethylene cutting boards.
Ventilated Sink Station
Call us at 800-410-0100 for a Quote
-
- Type 304 stainless steel construction.
- All inside corners are rounded for ease of cleaning.
- Designed to drop-in existing encounters to provide downdraft work area.
- Easy installation.
-
- Removable perforated work surface.
- Sink drain with strainer basket.
-
- Custom size and configurations.
- Hot and cold mixing faucet.
- Overflow drain
- Spray rinse assembly
- 316 Stainless steel
Folding Exam Table
Call us at 800-410-0100 for a Quote
-
- Type 304 stainless steel construction.
- Folds up conveniently for space saving.
-
- Locking a secures in position.
- Rollers allow for easy raising and lowering.
-
- Custom size and configurations. Units are sized per customer requirements.
- Stainless steel top with plastic insert for translucent x-ray work.
Mobile Downdraft Necropsy Table
Call us at 800-410-0100 for a Quote
-
- Designed as an economical dissection platform for use in research laboratories and medical schools.
- Fabricated from heavy gauge 304 stainless steel with No.4 finish.
-
- All stainless steel construction.
- Recessed tabletop, creased towards drain for added fluid flow.
- 5 in./13 cm. casters, all with brake mechanisms.
- (5) Removable 14ga perforated panels
-
- Stainer and outlet with ball valve fluid control.
- Please inquire about any custom layouts and designs.
- When planning an order, we will assist you in selecting options to complete your system.
- Accessory holder (Support sockets) are located on all (4) corners to accommodate the optional bookstand, leg supports, and/or instrument tray holder.
Custom Semi-Enclosed Ventilated Hood Dissection Table
Call us at 800-410-0100 for a Quote
-
- Fabricated from heavy gauge 304 stainless steel with a No. 4 finish.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Stainless steel base frame with adjustable feet.
-
- Faucet with cold water control.
- Hose rinse assembly with cold water control.
- Rapid and positive drainage.
- Hinged plexiglass workshield.
- Flourescent light fixture.
- GFCI duplex receptacle with waterproof cover.
- Plumbing and electrical lines factory installed and required only single point connection at the project location.
- Unit can be sized per your project requirements.
-
- Heavy-duty commercial disposal (1/2, 3/4, 1 or 2 hp)
- Table end rinse with cold water control valve and vacuum breaker
- CO2 valves/oxygen valves/vacuum valves/compressed air valves
- Emergency eye wash
- Centimeter or inch markings
- Type 316 stainless steel
- See image for available options, recommended dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
- Units are sized per customer requirements.
