Save Time And Money With Mortech's Overstock Inventory

Mortech Manufacturing is the industry leader for American-made postmortem laboratory equipment and America’s largest mortuary walk-in refrigeration manufacturer.

Due to recent ongoing disruptions in supply chains, the Mortech team has been working around the clock to increase production on a variety of products to reduce our lead times as much as possible. To help our customers save money, save time, and receive brand new products immediately, we’re having an Inventory Reduction Sale on some of our most in-demand and ready-to-ship products!

Equipment That Is Ready To Ship

Limited availability – products are offered at a discounted rate while supplies last!

Hydraulic Covered Cadaver Carrier with Rollers

MODEL: 600040-H
The unit allows for the concealed removal/transport of a deceased patient from the hospital room to the morgue. A roller top frame allows easy transfer of a body tray from carrier to lift or carrier to refrigerator. The unit features adjustable elevation and easy steering control. The carrier comes with a single locking caster to assist in steering, and all casters locking to ensure stability while working.

• Heavy gauge stainless steel roller frame.
• Hydraulic base with height adjustment via hydraulic foot pedal.
• Sturdy, lightweight aluminum top frame to conceal cadaver and is easily removable.
• Fabricated cover made of launderable cloth (replacements available).
• 8in/20cm casters all with brake mechanisms. Can lock instantly with a single foot pedal.

Call Us At 800-410-0100 For A Quote

Elevating Pathology Workstation with Downdraft & Backdraft Ventilation

MODEL: GL100
All required features for any grossing procedure comes standard. All stainless steel construction of the entire work area and all exterior closure panels. Height adjustment from 32 in./81 cm. to 44 in./111 cm. via electro-hydraulic mechanism. Ergonomic knee space adjustments allow for seated working height Dissecting area rinse to provide a constant flow of water below the work area.

• Exhaust duct for connection to building ventilation system with adjustable bellows. Includes both downdraft and backdraft ventilation.
• Foot operated faucet control for hot and cold water.
• Spray hose assembly with hand control.
• Heavy-duty commercial waste disposal, 1/2 hp and switch.
• Top mounted LED light fixtures.
• Formalin container with spigot.
• Stainless steel C-fold paper towel holder.
• Magnetic instrument holder.
• Polyethylene dissecting board.
• GFCI duplex receptacle with waterproof cover.

Call Us At 800-410-0100 For A Quote

Dissection Table with Hood

MODEL: 600021
Ideal for use in any university cadaver dissection course. Provides maneuverability, convenient storage, and assists in the control of debris. Fabricated from heavy gauge 304 stainless steel with a No.4 finish. Hinged covers which can be securely closed when not in use and fastened beneath the table top when opened.

• All stainless steel construction.
• 6 in./15 cm. casters, all with brake mechanisms.
• Recessed tabletop, creased toward drain for added fluid flow.
• (2) Section hinged covers.
• Latches and draw latch to hold covers in up/down/closed positions.
• Stainless steel pail holder (pail optional).
• .75 in./1 cm. Ball valve on drain for hose attachment and fluid control.

Call Us At 800-410-0100 For A Quote

72" Mobile Downdraft Necropsy Table

MODEL: 1036-234-72
The necropsy table features ventilation across the entire work area and provides a better working environment for students by removing odors and fumes. Designed as an economical dissection platform for use in research laboratories and medical schools. Fabricated from heavy gauge 304 stainless steel with No.4 finish.

• All stainless steel construction.
• Recessed tabletop, creased towards drain for added fluid flow.
• 5 in./13 cm. casters, all with brake mechanisms.
• (5) Removable 14ga perforated panels

Call Us At 800-410-0100 For A Quote

Portable Cremation Storage, 4-Tier Rack, Sideloading With Full Rollers

MODEL: 7011-4SL
Side access loading style. Ideal for a variety of cadaver storage applications. More compact than conventional cantilever storage units, allowing for greater storage capacity without increasing space. Designed to be easily loaded and unloaded by a single person with our M601 roller pallet assembly which fastens to any of our cadaver lifts such as the M690. Fabricated from .120 thick stainless steel.

• 6in/15cm casters, all with brake mechanisms, allow for easy movement.
• (5) Roller assemblies mounted in each bay make loading and unloading the cadaver tray/cremation container easy.
• Designed for use with our cadaver tray models: T3626 T3624 T3627

Call Us At 800-410-0100 For A Quote

Portable Cremation Storage, 3-Tier Rack, 30" Wide, Full Rollers

MODEL: 7011-3-30
Ideal for a variety of cadaver storage applications. More compact than conventional cantilever storage units, allowing for greater storage capacity without increasing space. Designed to be easily loaded and unloaded by a single person with our M601 roller pallet assembly which fastens to any of our cadaver lifts such as the M690. Fabricated from .120 thick stainless steel.

• 6in/15cm casters, all with brake mechanisms, allow for easy movement.
• (5) Roller assemblies mounted in each bay make loading and unloading the cadaver tray/cremation container easy.
• Designed for use with our cadaver tray models: T3626 T3624 T3627

Call Us At 800-410-0100 For A Quote

Standard Dissection Table With Drain Hole

MODEL: 600019-D
Designed as an economical dissection platform for use in research laboratories and medical schools. Fabricated from heavy gauge 304 stainless steel with a No.4 finish.

• All stainless steel construction.
• 6 in./15 cm. casters, all with brake mechanisms.

Call Us At 800-410-0100 For A Quote

Standard Autopsy Carrier, Total Caster Locking System With Stainless Steel Tray

MODEL: 600015TL
Economically priced yet still perform well under heavy duty use. Cadaver lift accessible. It includes our total locking caster system. It will enable the carrier to lock all casters, and for a directional locking to assist in the steering of the carrier. TOTAL LOCKING MECHANISM Enables the carrier with “ONE LOCATION” locking to all casters, “ONE LOCATION” directional locking to assist in the steering of the carrier and “ONE LOCATION” locking release or neutral position.

• Heavy gauge stainless steel roller frame.
• Hydraulic base with height adjustment via hydraulic foot pedal.
• Sturdy, lightweight aluminum top frame to conceal cadaver and is easily removable.
• Fabricated cover made of launderable cloth (replacements available).
• 8in/20cm casters all with brake mechanisms. Can lock instantly with a single foot pedal.

Call Us At 800-410-0100 For A Quote

Six Body Vertical Refrigerator

MODEL: 1036-R109
Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller. Heavy-duty chrome plated hardware for long lasting use. Unit ships knocked down and will require assembly. 38°Fahrenheit / 3.3°Celsius. Condenser is ~208-230V/50-60Hz/1Ph

• (6) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
• (6) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
• (6) Overlap doors with magnetic gaskets.
• (1) vapor proof light with switch.

Call Us At 800-410-0100 For A Quote

Two Body Mobile Refrigerator

MODEL: 1036-R101
Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller. Heavy-duty chrome plated hardware for long lasting use. Unit ships fully assembled; simply plug unit into an outlet and the unit is operational. 38°Fahrenheit / 3.3°Celsius. Condenser is ~115V/60Hz/1Ph.

• (4) 6in/15cm diameter casters, two are swivel type with wheel brakes.
• (2) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
• (2) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
• (1) Overlap door with magnetic gaskets.
• (1) vapor proof light with switch.

Call Us At 800-410-0100 For A Quote

Two Body Side Acting Refrigerator

MODEL: 1036-R116
Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller. Heavy-duty chrome plated hardware for long lasting use. 38° Fahrenheit / 3.3° Celsius. Condenser is ~115V/60Hz/1Ph.

• (2) Smooth and quiet rack slide rails using special Delrin rollers.
• (2) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
• (2) Overlap doors with magnetic gaskets.
• (1) vapor proof light with switch.

Call Us At 800-410-0100 For A Quote

Three Body Refrigerator, 40" Doors

MODEL: 1036-R114-40-3
Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller. Heavy-duty chrome plated hardware for long lasting use. Unit ships fully assembled; simply plug unit into an outlet and the unit is operational. 38°Fahrenheit / 3.3°Celsius. Condenser is ~115V/60Hz/1Ph.

• Door Width: 40″
• (3) interior roller racks.
• (3) HD plastic storage boards.
• (1) Overlap door with magnetic gasket.
• (1) vapor proof light with switch.

Call Us At 800-410-0100 For A Quote

Six Body UV-C Disinfection Hood

MODEL: BF1040
This benchtop hood utilizes a UV-C light in 254nm wavelength that acts as a germicidal on the surface of objects in just minutes. The large opening lid and corner cover plates allow for small laboratory items to be placed inside of the hood for typical sample preparation and power cord routing. The dual mode power switch allows for white LED lighting during normal use. As an added safety feature, the LED switches to a bright blue UV-C lighting during the disinfection cycle. The timer dial is used to adjust minutes of exposure required to kill typical bacteria, viruses, molds, and spores.

• This bench top hood utilizes a UV-C light in 254nm wavelength that acts as a germicidal on the surface of objects in just minutes
• TIG welded stainless steel with UV stabilized polycarbonate shields
• Dual mode power switch allows for white LED lighting during normal use and UV-C lighting for disinfection
• Available in single or dual UV-C lamp options
• Type: Dual UV-C Lamp Hood
• Without Leg Frame

Call Us At 800-410-0100 For A Quote

PurePath HEPA Air Purifier

MODEL: BF840H
The BF840H PurePath HEPA Air Purifier is a heavy duty auxiliary air filtration unit designed to filter to ambient air to a minimum particle collective efficiency of 99.97%. Equipped with two particulate filters and two HEPA filters, the BF840H has the horsepower to capture airborne bacteria and viral organisms to help maintain a safe laboratory environment.

• The BF840H has the horsepower to capture airborne bacteria and viral organisms to help maintain a safe laboratory environment
• Constructed all of stainless steel
• Equipped with two particulate filters and two HEPA filters

Call Us At 800-410-0100 For A Quote

Dissecting Table With Shelf

MODEL: BC125
Dissecting table with shelf accommodates Mopec’s standard polyethylene or neoprene boards that can easily be lifted or pulled out partially or completely. Table top is tapered toward the middle to a centrally located drainage hole that allows fluids to flow freely. Sturdy legs allow this table to be set on any counter or autopsy table. 3′ of drain hose included.

• Dimensions: 15.5″ (39 cm) H x 27″ (68 cm) L x 17″ (43 cm)W
• Material: Stainless steel
• Table can accommodate all Mopec Dissecting Boards up to 23″ (58 cm) x 16″ (40 cm)
• Completely washable with any disinfectant

Call Us At 800-410-0100 For A Quote

Autopsy Sink – Wall Mount, Center

MODEL: CC100
Save time and space with our C-Series Wall Mounted Autopsy Dissection Sinks. The body is transported on a moveable cart that adjoins a right sink approach for easy access. No additional lifting of the body is required. The cart trays overhang the sink to allow for proper fluid drainage.

Overall dimensions: 114″ L x 28″ W x 61″ H
• 34″ (FFL) to bottom of work surface.
• Stainless steel construction, center sink approach.
• Hydro aspirator with reversing flow valve. Includes hose hanger and 8′ clear PVC tubing.
• Two cold water body rinse valve with vacuum breaker and serrated hose fitting.
• Includes hose hanger and 8′ clear PVC tubing.
• Two hot and cold water fixture with wrist blade handles.
• 8″ swing spout with vacuum breaker.
• Four interchangeable removable stainless steel grid plates.
• Grid plates constructed with 1/2″ recess and 3/8″ diameter holes on 2″ square centers.
• Two GFCI duplex outlets with waterproof covers.
• Two instrument drawers – Flush to the table when closed and fitted.
• Flush inset handles at the top to keep fluid from accumulating in the drawers.
• Two hand spray assemblies. Heavy duty brass chrome plated hand piece.
• Durable 8′ long flexible hose. “J” hook to hold hand piece.
• Concealed pressure control shut off.
• Includes cart latch which is compatible with DA000 & DB000 cart chassis only.
• Other Mopec carts are equipped with locking casters.
• All plumbing and electrical work accomplished at factory.
• Only trade hook up required.
ˆ All DA,DB,DC,DD and DF series carts are compatible with all CA,CB and CC series autopsy sinks.

Call Us At 800-410-0100 For A Quote

Autopsy Table, Pedestal Style, Non-Elevating

MODEL: CE100
Pedestal style table that incorporates an optional elevating mechanism within the pedestal. A hydro-aspirator is conveniently located near the large sink basin for ease in collection and/or disposal of fluids.

Overall Dimensions:Standard Model: 100″ L x 30″ W
• Sink Dimension: 12″ D x 25″ L x 12″ W
• Material: Tabletop is 14 gauge stainless steel with #4 satin finish, built-in large Integral sink
• Electrical:(2) GFCI Receptacles positioned on each side of table
• Hydro aspirator: Designed to drain into sink, plumbed with water control valve, vacuum breaker and clear tubing
• Faucet: Hot & cold single lever mixing valve with swing spout faucet complete with vacuum breaker
• Sink Spray: Deck mounted chrome plated brass sink spray with high pressure hose
• Grid plates: Four removable perforated grid plates, grid pattern is perforated with 3/8″ (9.5mm) diameter holes on 2″ (50.8mm) staggered centers
• Capacity: 750 pounds
• All plumbing and electrical work accomplished at factory.

Call Us At 800-410-0100 For A Quote

Elevating “L” Shaped Autopsy Table Left Hand Wing

MODEL: CE750
L-shaped autopsy table with a pedestal design that includes all of the features necessary to perform an autopsy. Unit includes standard downdraft ventilation system. A hydro-aspirator is conveniently located near the sink basin for ease in collection and/or disposal of fluids. Waterproof electrical receptacles are provided on both sides of the table. A hot and cold water faucet is provided with a single lever and a vacuum breaker to safeguard the facility water supply. The table has a large sink and is creased toward the center for complete drainage. The wing or end of the table is supported by a cabinet pedestal which contains a drawer and storage compartment.

• Overall Dimensions: Main table section 100″ L x 30″ W x 37″ H
• Dimensions: Wing section 90″ L x 24″ W x 37″ H
• Dimensions: Elevation Option: 32-40″ H
• Material: All stainless steel construction.
• 14 gauge stainless steel table top, sink and grid plates
• 18 gauge stainless steel pedestal
• All type 304 stainless steel with #4 finish
• Large utility pedestal with smaller storage support pedestal and support section.
• Ventilation: Down draft ventilation (down draft dual cone system) in main section only.
• Large sink integral to table top 12″ x 20″ x 10″ deep
• Hydro aspirator: Designed with reversing flow valve. With hose hanger and 8′ of clear PVC tubing. Cold water control valve with vacuum brake swing spout.
• Grid Plates: (4) interchangeable removable grid plates, stainless steel construction with 1/2″ recess and 3/8″ diameter holes on 2″ square centers.
• Electrical: Two (2) GFCI duplex outlet with waterproof cover
• Spray: Hand spray rinse. Heavy duty brass chrome plated hand piece. Durable 8′ long flexible hose. Hose hanger and “J” hook to hang hand piece.
• Concealed pressure control/shut off.
• Removable pedestals if need for easier installation.
• All plumbing and electrical work accomplished at factory. Only trade hook up required.
• Unit is made to ship in 2 pieces and be assembled on site with a mechanical joint.
• Optional add-ons include a CO009 table perimeter rinse, a CO012 removable ruler, and a CO017 scale stand mounted right on the table.

Call Us At 800-410-0100 For A Quote

Embalming Machine, Right Approach

MODEL: CF100
The CF100 Embalming Sink incorporates all the necessary features for full body embalming. The sink includes a hot and cold water fixture with a hydro-aspirator that is conveniently located to aspirate any fluids from the body in preparation for embalming. A body rinse fixture is provided for the cleaning and rinsing process during the final stages of body embalming. Heavy-duty grid plates are utilized to support the embalming machine. The drain surface below the grid plates are tilted toward the large sink, which includes a perimeter rinse. The perimeter rinse prevents fluids from accumulating anywhere on the surface.

 Right-hand approach
• Hot/Cold Sink Spray Assembly with High Pressure Hose
• Vacuum Breaker Hydro Aspirator
• Two (2) Removable Stainless Steel Perforated Grid Plates
• Built-in Sponge Bowl
• Stainless Steel Drawer with Drip Rail Handle
• Quick Disconnect Air Ventilation Chambers
• Two (2) GFCI Electrical Receptacles
• Body Rinse consists of cold water valve, serrated hose fitting, vacuum breaker and 8″ clear tubing
• All plumbing and electrical work accomplished at factory. Only trade hookup required
• CF100 and CF200 Embalming Sinks can be utilized with attaching CF400 Embalming Cart
• Dimensions: 84″ (213.7 cm) Long x 29″ (73.7 cm) Wide
• Stainless Steel Embalming Sink (Large Sink 12″ (30.5cm) Long x 12″ (30.5cm) wide x 6.5″cm) deep

Call Us At 800-410-0100 For A Quote

Autopsy Scrub Sink (Single Faucet)

MODEL: CH100
The hand washing scrub sink is an essential product for any anatomy lab providing a specific place to wash hands before and after an autopsy or any handling of infectious material. Designed with a 12″ high backsplash, full 3/4″ radius corner construction and hot & cold foot pedal valve. All welded integral construction, 14 gauge stainless steel with #4 satin finish, no parting seams which can collect bacteria in the sink and backsplash.

Overall dimensions: 114″ L x 28″ W x 61″ H
• 34″ (FFL) to bottom of work surface.
• Stainless steel construction, center sink approach.
• Hydro aspirator with reversing flow valve. Includes hose hanger and 8′ clear PVC tubing.
• Two cold water body rinse valve with vacuum breaker and serrated hose fitting.
• Includes hose hanger and 8′ clear PVC tubing.
• Two hot and cold water fixture with wrist blade handles.
• 8″ swing spout with vacuum breaker.
• Four interchangeable removable stainless steel grid plates.
• Grid plates constructed with 1/2″ recess and 3/8″ diameter holes on 2″ square centers.
• Two GFCI duplex outlets with waterproof covers.
• Two instrument drawers – Flush to the table when closed and fitted.
• Flush inset handles at the top to keep fluid from accumulating in the drawers.
• Two hand spray assemblies. Heavy duty brass chrome plated hand piece.
• Durable 8′ long flexible hose. “J” hook to hold hand piece.
• Concealed pressure control shut off.
• Includes cart latch which is compatible with DA000 & DB000 cart chassis only.
• Other Mopec carts are equipped with locking casters.
• All plumbing and electrical work accomplished at factory.
• Only trade hook up required.
ˆ All DA,DB,DC,DD and DF series carts are compatible with all CA,CB and CC series autopsy sinks.

Call Us At 800-410-0100 For A Quote

Covered Dissection Table With Lid Assist

MODEL: HB1400
Designed for anatomy labs and teaching facilities. Features a recessed top which eliminates the need for a body tray. Built with a slope, the table drains toward one end and into an optional drain bucket which is neatly suspended under the frame. Two hinged covers are provided to securely conceal the cadaver in a discrete manner. During the dissection, the hinged covers lock neatly and securely under the table. A PVC stop valve is located under the drain to stop the flow of fluids while emptying the bucket.

• All stainless steel construction
• Mopec-Exclusive Lid Assist: Hinged cover with swing latches for easy open and close
• Built-in tapered slope
• Includes drain hole PVC drain valve
• Four heavy duty 5″ casters with (3) total lock and (1) directional lock
• (4) Post sockets included
• Weight capacity: Approximately 350 lbs
• Dimensions: 86″ L x 30″ W
• Sloped top height: 36″ – 35″ H
• Exhaust requirements: 220-340 CFM
• Static pressure: .34 – .67″ WG

Call Us At 800-410-0100 For A Quote

Autopsy Cart, for Autopsy Tables

MODEL: HE100
This dissection top can be used as an add-on with most autopsy tables. The heavy duty casters allow you to roll the cart to any area of the autopsy table where additional grossing space is needed. This custom built cart features a flat top surface and a small shelf built underneath.

• Dimensions: 48″ L x 24″ W x 40.5″ H with one end adjustable
• The elevating cart top adjusts from 38.5″ to 41.5″ in 1″ increments.
• Material: All stainless steel construction
• Casters: 5″ Heavy duty casters with swivel locks and wheel brakes

Call Us At 800-410-0100 For A Quote

Autopsy Cart, Chassis Only

MODEL: HL200
Specifically designed for use with portable x-ray fluoroscopy machines featuring a C-Arm electronic image detector. The tables open frame construction on one side allows the C-arm clear travel of almost the entire length of the table and sub frame.

• Dimensions: Chassis Only: 79.5″ L x 26.75″ W x 37″ H
• Material: All Stainless Steel Construction. Compatible with portable x-ray fluoroscopy machines with electronic image detector.
• Open frame construction on one side.
• Casters: (4) 8″ Heavy-duty non-corrosive powder coated casters.

Call Us At 800-410-0100 For A Quote

Dissection Table, Two Body Rotating Modified

MODEL: HM100
Specifically designed for use in anatomy labs where space is a concern with high student traffic. The two levels provide storage and access to the appropriate cadaver. The trays are smoothly rotated 180° with the anodized aluminum mechanism. Each tray has a small drain pan or drain plug.

• Dimensions: 95″ L x 33″ W x 39.7″ H
• Includes (2) fixed body trays
• Tray dimensions: 26″ (66 cm) W x 78″ (198 cm) Long
• Material: All Stainless Steel Construction with heavy-duty 304 tubing
• Casters: Four locking casters
• Weight capacity: 300 lbs per body tray
• Rotation: Smoothly rotates from tier position, 180 degrees
Note: The cart should be loaded, unloaded and trays rotated by two operators to ensure a safe and smooth rotation. The cart is operated by manual force of pulling the bottom tray toward the operator and up. The weight of the cadavers must be approximately the same within 20 pounds. Any overtly imbalanced load may make it difficult to rotate trays.

Call Us At 800-410-0100 For A Quote

32″ x 4 Tier Cantilever Storage Rack

MODEL: IA32401
Mopec’s adjustable cantilever storage racks are designed to support up to 500 pounds per tier. The storage rack is used along with Mopec’s body trays or autopsy cart tops which can be placed on the rack with a fork-type lift. Can be used with any-sized trays up to 32″ wide.

• Heavy duty cantilever storage rack, 4 tier
• Materials: All stainless steel
• Holds 500 lbs per tier
• Adjustable leveling pads
• Modular construction

Call Us At 800-410-0100 For A Quote

32″ X 4 X 01 4-Body Mortuary Rack (Roller Type

MODEL: IE32401
The IE Series Mortuary Rack is an economical and efficient means of mass storage of cadavers. The standard mortuary rack configuration is five body high x the specified number of bays for lateral storage expansion, although you can order any configuration of bays and tiers. The rack is designed to accept standard size roller type body trays, Mopec Product GA100. Each Mortuary Rack Storage bay is provided with a roller type body tray. The unit is designed for on-site assembly. No welding is required. Contact a Mopec Representative for more information.

• Type 304 stainless steel 11 gauge 1.5″ SQ tube
• Nylon roller wheel assembly
• Modular construction
• (2) Body tray bumpers per bay
• Includes (1) GA100 32″ body tray per bay
• Heavy duty adjustable leveling pads
• Weight capacity: Approximately 500 lbs per bay
• Accommodates 32″ Body Trays: GA100 & GA300
• Works with Cadaver Lifts: JD5001
• Forklifts with JD420 Roller Pallet: JD710, JD305 and JD405

Call Us At 800-410-0100 For A Quote

27″ X 2 X 01 Roller Rack Mobile

MODEL: IF27201
Specifically designed for use with portable x-ray fluoroscopy machines featuring a C-Arm electronic image detector. The tables open frame construction on one side allows the C-arm clear travel of almost the entire length of the table and sub frame.

• All stainless steel construction
• Polymer roller assembly
• Four heavy duty 5″ casters, 3 total locks and 1 directional lock
• Rear bars with bumpers for loading the body tray
• Tray latch at each tier
• Dimensions: 81.5″ L x 31.25″ W x 44.2″ H
• 14.5″ body clearance between trays
• 27″ tray x 2 tiers high x 1 bay
• Accommodates 27″ Body Trays: JC101 (sold separately)
• Works with Cadaver Lifts: JD301, JD501 and JD5001

Call Us At 800-410-0100 For A Quote

Cadaver Lift 27″ Tray Roller Pallet

MODEL: JD410
The roller pallet is constructed in conjunction with the IE100 Morgue Rack and is designed to fit on the cadaver lifts. The main frame consists of two bearing rails, frame and tray lock. The JD400 and JD401 roller pallets consists of 10 individual replaceable nylon roller wheels. The two bearing rails are welded together by a spacer frame which has four mounting holes so that the pallet can be mounted on the forks of the cadaver lift. Two tray locks are on each end of the pallet so that the tray can be removed from either end. These tray locks are self locking to prevent trays from rolling off. Material is stainless steel with a #4 satin finish. All welds are a continuous bead weld with all burrs and discoloration removed.

• Dimensions: 80 – 1/4″ (203cm) Long x 31 – 1/4″ (78cm) Wide
• All Stainless Steel Construction
• Roller Rack System
• Fits all Mopec Cadaver Fork Lifts
• Fits 27″ Heavy Duty Trays: JD410

Call Us At 800-410-0100 For A Quote

Have Questions?

Give Us A Call 800-410-0100