Products
#22 Scalpel Blades, Non-Sterile - 500 Pack
$179.95
#22 Blades for all post-mortem dissection procedures. Buy in bulk for convenience and savings. Material: non-sterile stainless steel Quantity: 500 pack Note: Not intended for medical applications or patient use.
1 x 2 Tooth Tissue Forceps
$10.95
All forceps are made from stainless steel.
1036-10 - Wall Mount Autopsy Station, Center Sink
Call us at 800-410-0100 for a Quote
-
- Large single-compartment sink with rapid and positive drainage.
- Cart-to-sink locking mechanism with slide latch which can be accessed from either side of the carrier.
- Full length specimen shelf (12 in./30 cm. wide x "length of unit").
- All stainless steel construction with heliarc welded seams and joints, ground and polished to a smooth finish.
- Large radii on all inside corners for easy cleaning and required sanitation.
- Plumbing and electrical lines are factory installed and require only minimum installation.
-
- Large instrument drawers.
- Light fixture over the work area.
- Heavy-duty commercial waste disposal, 1/2 hp an switch.
- (2) GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing a reverse pressure of water.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Hot and cold water fixture with convenient goose-neck faucet and wrist blade handles.
- Dissecting area rinse assembly with cold water valve.
- Complete backsiphon protection provided by reduced pressure principle assembly.
-
- Plumbing fixtures can be located in varying positions depending on your desired work environment.
- Custom layouts and designs are available.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
- See image for available options, typical dimensions, and additional accessories.
1036-13 - Flush Embalming Station
Call us at 800-410-0100 for a Quote
-
- All stainless steel construction on rear base housing.
- Large white vitreous china flush sink.
- Hot and cold water mixing faucet mounted on top deck with high spout for use with your embalming machine.
- Internally plumbed and wired requiring on singly point connection of water and power.
-
- GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing reverse pressure of water.
- Hot and cold water spray hose assembly with spray nozzle and 10ft/3m of flexible hose.
- Splash cover with port for placement of embalming table drain hose.
- Push button control to flush sink basin.
-
- See images for available options, typical dimensions, and additional accessories.
1036-19 L Shaped Autopsy Table
Call us at 800-410-0100 for a Quote
-
- All type 304 stainless steel construction with a polished No. 4 finish.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Height adjustment via electro-hydraulic mechanism.
- Plumbing and electrical lines factory installed and require only single point connection at the project location.
- Backflow protection for all plumbing fixtures to prevent backflow of contaminated water.
-
- Full length perforated dissection grids for autopsy table.
- Removable access panel.
- GFCI duplex receptacle with waterproof cover.
- Deluxe hydro-aspirator with reverse flow, cold water control valve and 10 ft./3 m. of hose.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Mixing faucet with gooseneck spout and wrist blade handles.
- Heavy-duty commercial waste disposal, 1/2 hp and switch.
- Large single compartment sink basin.
- Tabletop is sloped toward sink basin for rapid and positive drainage.
-
- See image for available options, typical dimensions, and additional accessories.
- Custom layouts and designs available. Left hand or right hand configurations are determined by autopsy table location.
- Options are based on available space.
- Optional backsplash available.
- When planning an order, we will assist you in selecting options to complete your system.
1036-19 A L Shaped Autopsy Table Adjustable Height
Call us at 800-410-0100 for a Quote
-
- All type 304 stainless steel construction with a polished No. 4 finish.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Height adjustment via electro-hydraulic mechanism.
- Plumbing and electrical lines factory installed and require only single point connection at the project location.
- Backflow protection for all plumbing fixtures to prevent backflow of contaminated water.
-
- Full length perforated dissection grids for autopsy table.
- Removable access panel.
- GFCI duplex receptacle with waterproof cover.
- Deluxe hydro-aspirator with reverse flow, cold water control valve and 10 ft./3 m. of hose.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Mixing faucet with gooseneck spout and wrist blade handles.
- Heavy-duty commercial waste disposal, 1/2 hp and switch.
- Large single compartment sink basin.
- Tabletop is sloped toward sink basin for rapid and positive drainage.
-
- See image for available options, typical dimensions, and additional accessories.
- Vustom layouts and designs available. Left hand or right hand configurations are determined by autopsy table location.
- Options are based on available space.
- Optional backsplash available.
- When planning an order, we will assist you in selecting options to complete your system.
1036-1R - Water Control Unit
$2,350.00
-
-
Tall Filler Spout for Embalming Machine
The tall faucet is designed for your embalming machine to fit under the spout. By using the master mixing valve, you can supply the desired temperature to the tank of your machine. The spout is easily turned out of the way when not in use. -
Master Mixing Valves
Water temperature to the table rinse and tall faucet are easily controlled with the master mixing valves. Simply adjust lever until the desired temperature is achieved.
-
Easy Installation
The entire unit is pre-assembled and pre plumbed for easy installation. Simply drop into the cutout in your countertop and connect the utility lines. THe base plate is fabricated of heavy gauge stainless steel. Will install in counters as shallow as 18in/45cm deep.
-
Tall Filler Spout for Embalming Machine
-
-
Table Rinse
A serrated attachment is provided for quick connection of rinse hose. A constant flow of water can be supplied to the embalming table for cleaning or procedure purpose. The rinse is vacuum breaker protected for backflow prevention. Rinse hose included. -
Hydro-Aspirator Assembly
A hydro-aspirator with built-in vacuum breaker prevents contamination of your water supply. The clear sight drain also prevents contamination since the air gap will not allow aspirated material back into the aspirator assembly. A valve is provided to control water supply to the aspirator assembly. Included 10ft/3m aspirator hose & 5in/12cm draw hose. -
LW480 Aspirator
Deluxe hydro-aspirator with built-in vacuum breaker and control lever to be used to reverse the flow of water so as to direct it through the hose connections for either drawing fluid from the body cavity or rinsing a desired location. Fits most standard faucet threads. Fabricated from chrome plated brass. -
LW481 Extension - Buy me separately!
The hydro-aspirator extension is fabricated from chrome plated brass. It provides further safety against polluted backflow. -
LW482 Non-clogging Head - Buy me separately!
The non-clogging aspirator head prevents large debris from entering and clogging the system. -
Aspirator Tubing
~Aspirator/Trocar tubing, ID: .375", OD 625". -
Splash Tubing
~Splash tubing for aspirator drain, Embalming and Autopsy tops. ID: 1", OD 1.25".
-
Table Rinse
-
- Pegboard Backsplash option available!
- Please specify Left or Right configuration when ordering. Designates which side the tall filler spout resides on.
- See images for available options and additional accessories.
- For individual units, see our embalming machines and aspirators section.
1036-2 Wall Mount Service Station
Call us at 800-410-0100 for a Quote
-
- Fabricated of stainless steel.
- Open stainless steel shelving for pluming access.
- All plumbing and electrical hook-ups designed for easy installation.
- .75 hp waste disposal unit.
- Completely equipped with all the best quality chrome and stainless steel fixtures.
-
- Spray hose assembly with cold water control valve, nozzle and 10 ft./3 m. of flexible hose.
- Hot and cold water tempering unit with lever handle.
- Central lever self closing pre-rinse valve with 10 ft./3 m. flexible vinyl hose.
- GFCI duplex receptacle.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing reverse pressure of water.
-
- 1036-2SE includes emergency shower and eyewash assemblies.
- See images for available options, typical dimensions, and additional accessories.
1036-215 Small Animal Necropsy Table
Call us at 800-410-0100 for a Quote
-
- Animal necropsy workstation
- Type 304 stainless steel construction. Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
-
- Access panel door.
- GFCI duplex receptacle with waterproof cover.
- Spray hose assembly with cold water control valve, nozzle and 10 ft./3 m. of flexible hose.
- Manual Damper.
- Radii on all corners for easy cleaning.
- Rapid and positive drainage.
- Full length, perforated supports.
-
- Total Downdraft Ventilation option available.
- Double-Cone Downdraft Ventilation option available.
- See image for available options, recommended dimensions, and additional accessories.
- Options based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
1036-24 Standard Autopsy Table
Call us at 800-410-0100 for a Quote
-
- All type 304 stainless steel construction with a polished No. 4 finish.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Removable lower shelf.
- Stainless steel leg assembly with adjustable leveling feet.
- Plumbing and electrical lines factory installed and require only single point connection at the project location.
-
- Unit pictured with (4) perforated stainless steel body supports, 8 in./20 cm. wide.
- GFCI duplex receptacle with waterproof cover.
- Deluxe hydro-aspirator with reverse flow, cold water control valve and 10 ft./3 m. of hose.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Large sink basin with lever handle drain.
-
- See image for available options, typical dimensions, and additional accessories.
- Please inquire about any custom layouts and designs.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
1036-250 Large Hydraulic Necropsy Table
Call us at 800-410-0100 for a Quote
-
- U-shaped table is designed for use as a large animal necropsy table. It features all heavy gauge stainless steel construction. The tabletop and inner frame support are attached to an electrically powered hydraulic scissor lift. Inner frame support is fabricated from heavy gauge stainless steel tubing.
-
- Designed to handle a centralized load up to 5000 lbs/ 2267 kg and an offset load up to 2500 lbs/ 1113 kg.
- floor mounted, hydraulic scissor lift with load capacity of 6,000 lbs/ 2721 kg. (~230v/50-60Hz/1 - 1.5hp motor).
- Accordion style bellows surround the scissor lift allowing for complete wash down of the unit.
- Drainage via opening located on the back edge of the table.
- Easy to use up/down elevation control.
-
- Lighter capacity mobile units also available.
- Inground lifting devices available. Please contact us for details and special installation requirements.
- See image for available options, recommended dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
1036-250M Mobile Hydraulic Necropsy Table
Call us at 800-410-0100 for a Quote
-
- U-shaped, mobile table is designed for use as a large animal necropsy table. It features all heavy gauge stainless steel construction. The tabletop and inner frame support are attached to an electrically powered hydraulic scissor lift. Inner frame support is fabricated from heavy gauge stainless steel tubing.
-
- Designed to handle a centralized load up to 5000 lbs/ 2267 kg and an offset load up to 2500 lbs/ 1113 kg.
- Accordion style bellows surround the scissor lift allowing for complete wash down of the unit.
- Drainage via slot opening located on the back edge of the table, or small sink with strainer.
- Easy to use up/down elevation control.
- (2) swivel and (2) non-swivel casters.
- Floor brake to secure in place.
-
- Tabletop can be sized to your specific project requirements
- See image for available options, typical dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
1036-250SP Self-Propelled Hydraulic Necropsy Table
Call us at 800-410-0100 for a Quote
-
- Table is designed for use as a large animal necropsy table.
- All heavy gauge stainless steel construction.
- Inner frame support is fabricated from heavy gauge stainless steel tubing.
- The tabletop and inner frame support are attached to an electrically powered hydraulic scissor lift.
- Accordion style bellows surround the scissor lift allowing for complete wash down of the unit.
-
- Designed to handle a centralized load up to 5000 lbs/ 2267 kg and an offset load up to 2500 lbs/ 1113 kg.
- Easy to use up/down elevation control. Variable speed control - forward/reverse. 180° turning radius.
- Built in 24V charger and D/C battery.Butterfly switches for forward & reverse.
- Push buttons for raising and lowering of forks.
- Built in horn.
- Electro-mechanical brake system.
- Drainage slot along side or end, with optional small sink with strainer.
- (2) Rear spring loaded stabilizing casters and (2) ridged casters located in front.
-
- See image for available options, typical dimensions, and additional accessories.
- When planning an order, we will assist you in selecting options to complete your system.
- Options based on available space.
1036-3 CO Embalming Table Collection System
Call us at 800-410-0100 for a Quote
-
- Quick and easy set up made to mount on your embalming area base cabinets. Continuous rinse moves debris of harmful contaminants and air-borne pathogens down the drain.
- 10.5" Height x 10 Width dimensions at wall mount, height tapers down to 7.5"
- 12" protrusion from mount
-
- All stainless steel construction
- 3" Removable drain for evidence rinse or large waste not meant to be drained.
- Single point cold water pluming connection.
- Cold water flow control valve.
- Bottom removable access panel.
-
- See images for available options, typical dimensions, and additional accessories.
1036-3 Embalming Collection System
Call us at 800-410-0100 for a Quote
-
- All stainless steel construction.
- Collection drain with cold water rinse
- Hot and cold water mixing faucet mounted on top deck with high spout for use with your embalming machine.
- Internally plumbed and wired requiring only a single point connection for water and power.
-
- Cold water spray hose assembly with spray nozzle.
- Access panel.
-
- Wall mount (standard) or floor mount available.
- Hot and cold water mixing faucet.
- Spray hose assembly with spray nozzle.
- See images for available options, typical dimensions, and additional accessories.
Click here to view or download this item in our online catalog!
1036-41 A Adjustable Height Pedestal Autopsy Table
Call us at 800-410-0100 for a Quote
-
- All type 304 stainless steel construction with a polished No. 4 finish.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Height adjustment via electro-hydraulic mechanism.
- Plumbing and electrical lines factory installed and require only single point connection at the project location.
- Backflow protection for all plumbing fixtures to prevent backflow of contaminated water.
-
- Unit pictured with (4) Full length body supports
- Removable access panel.
- GFCI duplex receptacle with waterproof cover.
- Deluxe hydro-aspirator with reverse flow, cold water control valve and 10 ft./3 m. of hose.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Mixing faucet with gooseneck spout and wrist blade handles.
- Heavy-duty commercial waste disposal, 1/2 hp and switch.
- Large single compartment sink basin.
- Rapid and positive drainage.
-
- See image for available options, typical dimensions, and additional accessories.
- Please inquire about any custom layouts and designs.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
1036-41 Stationary Pedestal Autopsy Table
Call us at 800-410-0100 for a Quote
-
- All type 304 stainless steel construction with a No. 4 finish.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Radii on all inside and outside corners for easy cleaning.
- Plumbing and electrical lines factory installed and require only single point connection at the project location.
- Backflow protection for all plumbing fixtures to prevent backflow of contaminated water.
-
- (3) Solid or perforated stainless steel body supports, 8 in./20 cm. wide.
- GFCI duplex receptacle with waterproof cover.
- Deluxe hydro-aspirator with reverse flow, cold water control valve and 10 ft./3 m. of hose.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Mixing faucet with gooseneck spout and wrist blade handles.
- Heavy-duty commercial waste disposal, 1/2 hp and switch.
- Large single compartment sink basin.
- Rapid and positive drainage.
-
- See image for available options, typical dimensions, and additional accessories.
- Please inquire about any custom layouts and designs.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
1036-48 Elevating & Rotating Pedestal Autopsy Table
Call us at 800-410-0100 for a Quote
-
- All type 304 stainless steel construction with a polished No. 4 finish.
- Heliarc-welded seams and joints, ground and polished to match adjoining surfaces.
- Height adjustment via electro-hydraulic mechanism.
- Radii on all inside and outside corners for easy cleaning.
- Top rotates manually 180° in either direction and features a convenient swivel lock handle.
- Plumbing and electrical lines factory installed and require only single point connection at the project location.
- Backflow protection for all plumbing fixtures to prevent backflow of contaminated water.
-
- (3) Solid or perforated stainless steel full length body supports
- Large bearing assembly for easy rotation.
- GFCI duplex receptacle with waterproof cover.
- Deluxe hydro-aspirator with reverse flow, cold water control valve and 10 ft./3 m. of hose.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Mixing faucet with gooseneck spout and wrist blade handles.
- Heavy-duty commercial waste disposal, 1/2 hp and switch.
-
- See image for available options, typical dimensions, and additional accessories.
- Please inquire about any custom layouts and designs.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
1036-7 Wall Mount Autopsy Station, Left Sink
Call us at 800-410-0100 for a Quote
-
- Large single-compartment sink with rapid and positive draining.
- Cart-to-sink locking mechanism with slide latch which can be accessed from either side of the carrier.
- Full length specimen shelf (12 in./30 cm. wide x "length of unit").
- All stainless steel construction with heliarc welded seams and joints, ground and polished to a smooth finish.
- Large radii on all inside corners for easy cleaning and required sanitation.
- Plumbing and electrical lines are factory installed and require only minimum installation.
-
- Large instrument drawer.
- Light fixture over the work area.
- Heavy-duty commercial waste disposal, 1/2 hp an switch.
- GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing a reverse pressure of water.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Hot and cold water fixture with convenient goose-neck faucet and wrist blade handles.
- Dissecting area rinse assembly with cold water valve.
- Complete back-siphon protection provided by reduced pressure principle assembly.
-
- Plumbing fixtures can be located in varying positions depending on your desired work environment.
- Custom layouts and designs are available.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
- See image for available options, typical dimensions, and additional accessories.
1036-8 Wall Mount Autopsy Station, Right Sink
Call us at 800-410-0100 for a Quote
-
- Large single-compartment sink with rapid and positive drainage.
- Cart-to-sink locking mechanism with slide latch which can be accessed from either side of the carrier.
- Full length specimen shelf (12 in./30 cm. wide x "length of unit").
- All stainless steel construction with heliarc welded seams and joints, ground and polished to a smooth finish.
- Large radii on all inside corners for easy cleaning and required sanitation.
- Plumbing and electrical lines are factory installed and require only minimum installation.
-
- Large instrument drawer.
- Light fixture over the work area.
- Heavy-duty commercial waste disposal, 1/2hp an switch.
- GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing a reverse pressure of water.
- Spray hose assembly with cold water control valve, nozzle, 10 ft./3 m. of flexible hose.
- Hot and cold water fixture with convenient goose-neck faucet and wrist blade handles.
- Dissecting area rinse assembly with cold water valve.
- Complete backsiphon protection provided by reduced pressure principle assembly.
-
- Plumbing fixtures can be located in varying positions depending on your desired work environment.
- Custom layouts and designs are available.
- Options are based on available space.
- When planning an order, we will assist you in selecting options to complete your system.
- See image for available options, typical dimensions, and additional accessories.
1036-9 Stainless Steel Embalming Station
Call us at 800-410-0100 for a Quote
-
- All stainless steel construction.
- Large sink basin.
- Hot and cold water mixing faucet mounted on top deck with high spout for use with your embalming machine.
- Internally plumbed and wired requiring only a single point connection for water and power.
-
- GFCI duplex receptacle with waterproof cover.
- Deluxe aspirator with reverse flow for additional waste removal: "reverse flow" feature instantly relieves suction clogging by providing reverse pressure of water.
- Cold water spray hose assembly with spray nozzle.
- Access panel.
-
- Wall mount (standard) or floor mount available.
- Splash guard cover for sink basin.
- .75 hp waste disposal unit.
- Exhaust vent to connect to building ventilation system.
- Eyewash assembly.
- Perimeter sink rinse assembly.
- Hot and cold water mixing faucet.
- Hot and cold water spray hose assembly with spray nozzle.
- See images for available options, typical dimensions, and additional accessories.
1036-R100 Two Body Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships fully assembled; simply plug unit into an outlet and the unit is operational.
- 38°Fahrenheit / 3.3°Celsius.
- Condenser is ~115V/60Hz/1Ph.
-
- (2) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
- (2) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (2) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- Custom sizes for larger cases.
- Casters: (4) 6in/15cm diameter casters, two are swivel type with wheel brakes.
- Full length interior roller racks.
- HD plastic storage boards.
- ~208-230V/50-60Hz/1Ph condenser (may affect dimensions & features).
- Freezer model available!
Click here to view or download this item in our online catalog!
1036-R101 Two Body Mobile Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships fully assembled; simply plug unit into an outlet and the unit is operational.
- 38°Fahrenheit / 3.3°Celsius.
- Condenser is ~115V/60Hz/1Ph.
-
- (4) 6in/15cm diameter casters, two are swivel type with wheel brakes.
- (2) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
- (2) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (1) Overlap door with magnetic gaskets.
- (1) vapor proof light with switch.
-
- Custom sizes for larger cases.
- Full length interior roller racks.
- HD plastic storage boards.
- ~208-230V/50-60Hz/1Ph condenser (may affect dimensions & features).
- Freezer model available!
1036-R102 Six or Nine Body Tiered Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships knocked down and will require assembly.
- 38°Fahrenheit / 3.3°Celsius.
- Condenser is ~208-230V/50-60Hz/1Ph.
-
- (3) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
- (3) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (6) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- Custom sizes for larger cases.
- Full length interior roller racks.
- HD plastic storage boards.
- Wood framed exterior ramp with galvanized wearing surface.
- Single or double tier carrier.
- Freezer model available!
1036-R105 Three Body Side Acting Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships knocked down and will require assembly.
- 38° Fahrenheit / 3.3° Celsius.
- Condenser is ~115V/60Hz/1Ph.
-
- (3) Smooth and quiet rack slide rails using special Delrin rollers.
- (3) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (3) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- ~208-230V/50-60Hz/1Ph condenser (may affect dimensions & features).
- Freezer model available!
1036-R106 Four Body Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships knocked down and will require assembly.
- 38°Fahrenheit / 3.3°Celsius.
- Condenser is ~115V/60Hz/1Ph.
-
- (4) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
- (4) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (4) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- Custom sizes for larger cases.
- Full length interior roller racks.
- HD plastic storage boards.
- ~208-230V/50-60Hz/1Ph condenser (may affect dimensions & features).
- Freezer model available!
1036-R108 Six Body Horizontal Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships knocked down and will require assembly.
- 38°Fahrenheit / 3.3°Celsius.
- Condenser is ~208-230V/50-60Hz/1Ph.
-
- (6) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
- (6) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (6) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- Custom sizes for larger cases.
- Full length interior roller racks.
- HD plastic storage boards.
- Freezer model available!
1036-R109 Six Body Vertical Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships knocked down and will require assembly.
- 38°Fahrenheit / 3.3°Celsius.
- Condenser is ~208-230V/50-60Hz/1Ph.
-
- (6) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
- (6) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (6) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- Custom sizes for larger cases.
- Full length interior roller racks.
- HD plastic storage boards.
- Freezer model available!
1036-R112 Nine Body Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships knocked down and will require assembly.
- 38°Fahrenheit / 3.3°Celsius.
- Condenser is ~208-230V/50-60Hz/1Ph.
-
- (9) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
- (9) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (9) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- Custom sizes for larger cases.
- Full length interior roller racks.
- HD plastic storage boards.
- Freezer model available!
1036-R115 Roll-in Two Body Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships fully assembled; simply plug unit into an outlet and the unit is operational.
- 38°Fahrenheit / 3.3°Celsius.
- Condenser is ~115V/60Hz/1Ph.
-
- (1) interior roller rack.
- (1) HD plastic storage board.
- (1) vapor proof light with switch.
- (1) Overlap door with magnetic gasket.
-
- Custom sizes for larger cases.
- Body trays: Type 304 Stainless steel with No.4 finish.
- Mortuary cot or carrier.
- ~208-230V/50-60Hz/1Ph condenser (may affect dimensions & features).
1036-R116 Two Body Side Acting Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships fully assembled, simply plug unit into an outlet and the unit is operational.
- 38° Fahrenheit / 3.3° Celsius.
- Condenser is ~115V/60Hz/1Ph.
-
- (2) Smooth and quiet rack slide rails using special Delrin rollers.
- (2) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (2) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- ~208-230V/50-60Hz/1Ph condenser (may affect dimensions & features).
- Freezer model available!
1036-R119 Twelve Body Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships knocked down and will require assembly.
- 38°Fahrenheit / 3.3°Celsius.
- Condenser is ~208-230V/50-60Hz/1Ph.
-
- (12) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
- (12) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (12) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- Custom sizes for larger cases.
- Full length interior roller racks.
- HD plastic storage boards.
- Freezer model available!
1036-R121 Fifteen Body Refrigerator
Call us at 800-410-0100 for a Quote
-
- Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller.
- Heavy-duty chrome plated hardware for long lasting use.
- Unit ships knocked down and will require assembly.
- 38°Fahrenheit / 3.3°Celsius.
- (2)~208-230V/50-60Hz/1Ph Condensers.
-
- (15) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
- (15) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
- (15) Overlap doors with magnetic gaskets.
- (1) vapor proof light with switch.
-
- Custom sizes for larger cases.
- Full length interior roller racks.
- HD plastic storage boards.
- Freezer model available!
2 x 3 Tooth Tissue Forceps
$10.95
All forceps are made from stainless steel.
3 x 4 Tooth Tissue Forceps
$10.95
All forceps are made from stainless steel.
4 x 5 Tooth Tissue Forceps
$12.95
All forceps are made from stainless steel.
4" Mini Scalpel, Disposable - 100 Pack
$152.95
Superior stainless steel blade on a uniquely designed handle. Each scalpel is supplied with a flexible blade cover for complete protection. Entire unit is disposable. Dimensions: Overall 4″ Long Material:...
